INSTALLATION AND OPERATING
INSTRUCTIONS FOR RAMSEY
UNIVERSAL WIRELESS REMOTE
CONTROL FOR ATV WINCHES
KIT #’S 251203, 251204,
251205, & 251206
Warnings
1. T
HE
R
AMSEY
U
NIVERSAL
W
IRELESS
R
EMOTE FOR
ATV W
INCHES IS
DESIGNED FOR USE ON SELF
-
RECOVERY WINCHES ONLY
. T
HE REMOTE IS
NOT DESIGNED FOR AND SHOULD NOT BE USED ON WINCHES OR HOISTS IN
INDUSTRIAL APPLICATIONS
(
CAR HAULERS
/
CARRIERS
,
WRECKERS
,
CRANES
,
ETC
.)
OR FOR ANY OTHER REMOTE CONTROLLED APPLICATION
.
2. W
HEN REELING IN CABLE UNDER NO LOAD
,
RELEASE THE REMOTE BUTTON
WHEN THE HOOK IS A MINIMUM OF
3
FT
(1
M
)
FROM THE WINCH FAIR
-
LEAD
. C
AREFULLY JOG THE REMOTE CONTROL BUTTON UNTIL THE HOOK IS A
MINIMUM OF
1
FT
(.3
M
)
FROM THE FAIR
-
LEAD
. D
ISENGAGE THE CLUTCH
AND FINISH SPOOLING IN CABLE BY ROTATING THE DRUM BY HAND
.
3. When finished winching, turn transmitter off.
4. Do not pressure wash or steam clean the receiver. This can dam-
age the receiver and adversely affect operation.
5. Refer to winch owner’s manual for all winch operating instruc-
tions and warnings.
The following are general installation instructions. Actual
installation may vary depending on the ATV manufacturer
and model.
