Page 1 of 3
Installation Instructions
IS-26631_RevA
Important Safety Information
Tools Required
Contents
Rail Side Step
NOTE:
Actual product may vary from illustration.
18-19 Jeep Wrangler
JL
Unlimited
Figure 1
Figure 2
Figure 3
Figure 4
Threaded Hole
Threaded Hole
Threaded Hole
Pinch Weld Holes
Pinch Weld Holes
Pinch Weld Holes
FRONT
CENTER
REAR
Front
Front
Front
• CAUTION - Before driving, ensure that the steps are properly secured to vehicle.
• Periodically check all components for tightness.
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at
1-800-
328-2409
Socket
Wrench
Safety glasses
18mm Wrench
Socket (Set)
Left Step
Right Step
8mm x 35mm
Bolt (6)
8mm Lock
Washer(6)
8mm Flat
Washer(6)
6mm Flat
Washer(24)
6mm x 25mm
Bolt (12)
6mm Nylock
Nut (12)
1
Installation
Remove any Factory or aftermarket steps or rock rails present on the vehicle.
Start installation on the driver/left side of the
vehicle.
Locate the (3) pairs of factory mounting holes
along the pinch weld.
See Figure 1
.
The mounting brackets on the Rail Side Steps
attach to the holes in the pinch weld and the
small factory threaded hole directly behind the
pinch weld.
See Figures 2 - 4
2
