ENGLISH
18
Rami - TEL 300/TEL 300S
TEL 300 / TEL 300S
mains connector has three wires (2 poles + earth). Earth should imperatively
be connected to mains earth.
[
Never use this equipement without proper grounding.
[
Check quality of grounding.
[
Should noise or hum occurs when connected to other equipments, never disconnect
grounding, use insulating transformer on mains.
[
Never open the case without disconnecting mains
[
Avoid high temperature exposure.
[
Never expose the equipment to rain, snow or moisture.
[
Using
TEL300 / TEL 300S
headphone amplifier, listening to high level can result in
permanent damage to ears.
TEL 300 / TEL 300S complies with :
En60065, EN55013, EN55020, EN60555-2, et EN60555-3, according to 73/23/EEC,
89/336/EEC et 93/68/EEC
Warning !!!
Power supply :
230 Volts + / - 10 %
50 / 60 Hz
Dimensions
:
Rack 1 unité / 1 unit Rack
483 x 44 x 230 mm
Weight :
3,5 kg
RFI protections on all audio inputs/outputs, remote control input and mains input.
+6 dBu / 1,55 V
+6 dBu / 1,55 V
0 dBu / 0,775 V
XLR
JACK
XLR
Balanced
Balanced
Unbalanced
Outputs
Connector
Type
Impedance
Nominal Level
+26 dBu / 15,5 V
+26 dBu / 15,5 V
+20 dBu / 7,75 V
Maximum Level
Correspondent
only
47 Ohms
220 Ohms
27 Ohms
Mixing of send
and return
Headphone
+6 dBu / 1,55 V +24 dBu / 12,28 V
+12 dBu / 3,09
-42 dBu / 6,16 mV
V
-10 dBu / 0,25 V
33 kOhms
1,2 kOhms
4.7 kOhms
Microphone
Audio line
Telephone line
XLR
XLR
RJ 11
Balanced
Balanced
Balanced
Sens mini : -26 dBu / 39 mV
Sens maxi : -56 dBu / 1,2 mV
Inputs
Connector
Type
Impedance
Sensitivity
Distorsion
Connecteurs :
ENTREE / SORTIE AUDIO type XLR
ENTREE / SORTIE TELEPHONE prise RJ11
Alimentation:
230 Volts +/
-
10%
Dimensions:
Rack 1 unité
Face avant:
483 X 44 mm
Profondeur
230 mm hors connecteurs
Profondeur
300 mm avec connecteurs
Poids:
3,5 kg
Dimensions colisage:
650 x 315 x 85 mm
Poids colisage:
4,5 kg
Câblage XLR
:
1-
MASSE
2-
Pt CHAUD
3-
Pt FROID
SPECIFICATIONS
INFORMATIONS
