
88
SERVICING AND MAINTENANCE
E
NGINE
A
IR
C
LEANER
F
ILTER
For the proper maintenance intervals
NOTE:
Be sure to follow the severe duty conditions main
-
tenance interval if applicable.
Engine Air Cleaner Filter Selection
The quality of replacement filters varies
considerably. Only high quality Mopar® certified
filters should be used.
Beauty Cover Removal/Installation
The engine beauty cover will need to be removed in
order to service the engine air cleaner filter or to
gain better access to the engine compartment.
Beauty Cover Removal
1. Lift up on the front two corners of the beauty
cover to unseat rubber ball socket fasteners.
Beauty Cover
2. Pull the cover forward to release rear guides
from rubber grommets to remove from the
vehicle.
Beauty Cover Attachment Points
Beauty Cover Installation
1. Install the rear guide posts into the rubber
grommets.
2. Push down on the front to seat the two rubber
ball sockets in the front of the cover.
WARNING!
The air induction system (air cleaner, hoses,
etc.) can provide a measure of protection in the
case of engine backfire. Do not remove the air
induction system (air cleaner, hoses, etc.) unless
such removal is necessary for repair or
maintenance. Make sure that no one is near the
engine compartment before starting the vehicle
with the air induction system (air cleaner, hoses,
etc.) removed. Failure to do so can result in
serious personal injury.
CAUTION!
No step! Maximum force on beauty cover and
engine air cleaner filter is 50 lb or less.
1 — Rear Grommets
2 — Front Ball Socket Fasteners
23_DT_TRX_SU_EN_USC_t.book Page 88