RAM AUF200, User Manual, Page: 18 / 22

A - 3 pin female balanced input XLR for left channel A
(Level included from - 10 dBu to + 12 dBu Clipping at + 26 dBu)
B - 3 pin female balanced input XLR for right channel A
(Level included from - 10 dBu to + 12 dBu Clipping at + 26 dBu)
C - 3 pin female balanced input XLR for left channel B
(Level included from - 10 dBu to + 12 dBu Clipping at + 26 dBu)
D - 3 pin female balanced input XLR for right channel B
(Level included from - 10 dBu to + 12 dBu Clipping at + 26 dBu)
E - 3 pin male balanced XLR for left main output
(Nominal level at +6dBu ; for other levels, contact us)
F - 3 pin male balanced XLR for right main output
(Nominal level at +6dBu ; for other levels, contact us )
G - Balanced output RCA connector for left monitoring (same modulation as the bargraph and
the headphones)
Nominal Level 0dBu
H - Balanced output RCA connector for right monitoring (same modulation as the bargraph and
the headphones)
Nominal Level 0dBu
I - Option.
BYPASS
TRANSFORMER
IN B
IN A
OUT
IN C
REF
0Vu
0dBu
+4dBu
+6dBu
RIGHT RIGHT LEFT RIGHT LEFT LEFT RIGHT LEFT
REMOTE RELAY OUTPUT REMOTE CONTROL INPUT
OPTION
MONITOR OUTPUT INPUT C INPUT B INPUT A
Made in France (Fr)
230V 50/60Hz 12W T 250mA L
PUSH PUSH PUSH PUSH
C D E F G J I L K H A B
XLR Input / Output Wiring
1 : Ground
2 : Hot signal
3 : Cold signal
REAR PANEL
RAMI AUF200S 18