354
IN CASE OF EMERGENCY
Jacking Tools
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
Assembled For Jack Operation
Assembled For Jack Operation
R
EMOVING
T
HE
S
PARE
T
IRE
1. Remove the spare tire before attempting to jack up
the truck. Attach the lug wrench to the extension
tubes with the curved angle facing away from the
vehicle. Insert the extension tubes through the
access hole between the lower tailgate and the
top of the fascia/bumper and into the winch
mechanism tube.
Winch Mechanism Tube
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
CAUTION!
The lug wrench can only be attached to extension
two (2).
When attaching the tool to the winch mechanism be
sure the large flared end opening on extension four
(4) is positioned correctly over the winch mechanism
adjusting nut.
Damage to the lug wrench, extensions and winch
mechanism may occur from improper tool assembly.
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
5 — Jack Driver
WARNING!
After using the jack and tools, always reinstall them in
the original carrier and location. While driving you may
experience abrupt stopping, rapid acceleration or sharp
turns. A loose jack, tools, bracket or other objects in the
vehicle may move around with force, resulting in
serious injury.
23_DJD2_OM_EN_USC_t.book Page 354