IN CASE OF EMERGENCY
208
4. Rotate the lug wrench handle clockwise
until the wheel is drawn into place
against the underside of the vehicle.
Continue to rotate until you feel the
winch mechanism slip, or click three or
four times. It cannot be overtightened.
Push against the tire several times to
ensure it is firmly in place.
Rotating The Lug Wrench Handle
NOTE:
The winch mechanism is designed for use
with the jack extension tube only. Use of an
air wrench or other power tools is not recom
-
mended and can damage the winch.
Reinstalling The Jack And Tools
1. Tighten the jack all the way down by
turning the jack turn-screw counterclock
-
wise until the jack is snug.
2. Position the jack and tools into bracket
assembly. Make sure the lug wrench is
under the jack near the jack turn-screw.
Snap tools into bracket assembly clips.
Install the jack into bracket assembly
and turn the jack-turn-screw clockwise
until jack is snug into bracket assembly.
Jack And Tools Bracket Assembly
3. Place the jack and tool bracket assembly
in the storage position holding the jack
by the jack turn-screw, slip the jack and
tools under the seat so that the bottom
slot engages into the fastener on the
floor.
Jack Hold Down Fastener
NOTE:
Ensure that the jack and tool bracket
assembly slides into the front hold down
location.
4. Turn the wing bolt clockwise to secure to
the floor pan. Reinstall the plastic cover.
Wing Bolt/Jack And Tools
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 208
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......
