RAM 2015 1500, Operating Information Manual, Page: 84 / 998

WARNING!
•
Persons who are unable to feel pain to the
skin because of advanced age, chronic
illness, diabetes, spinal cord injury, medi-
cation, exhaustion or other physical condi-
tion must exercise care when using the
seat heater. It may cause burns even at
low temperatures, especially if used for
long periods of time.
•
Do not place anything on the seat or
seatback that insulates against heat, such
as a blanket or cushion. This may cause
the seat heater to overheat. Sitting in a
seat that has been overheated could
cause serious burns due to the increased
surface temperature of the seat.
Front Heated Seats
The front heated seats control buttons are lo-
cated on the center instrument panel below the
climate controls.
If your vehicle is equipped with a touchscreen,
the front heated seats control buttons are also
located within the climate or controls screen of
the touchscreen.
•
Press the heated seat button once to turn
the High setting On.
•
Press the heated seat button a second
time to turn the Low setting On.
•
Press the heated seat button a third time
to turn the heating elements Off.
When the HI-level setting is selected, the heater
will provide a boosted heat level during the first
four minutes of operation. Then, the heat output
will drop to the normal HI-level. If the HI-level
setting is selected, the system will automatically
switch to LO-level after approximately 60 min-
utes of continuous operation. At that time, the
display will change from HI to LO, indicating the
change. The LO-level setting will turn OFF
automatically after approximately 45 minutes.
NOTE:
The engine must be running for the heated
seats to operate.
Rear Heated Seats
On some models, the two outboard seats are
equipped with heated seats. The heated seat
switches for these seats are located on the rear
of the center console.
There are two heated seat switches that allow
the rear passengers to operate the seats inde-
pendently. You can choose from HIGH, LOW or
OFF heat settings. Amber indicator lights in
each switch indicate the level of heat in use.
Two indicator lights will illuminate for HIGH, one
for LOW and none for OFF.
Press the switch once to select
HIGH-level heating. Press the switch
a second time to select LOW-level
heating. Press the switch a third time
to shut the heating elements OFF.
NOTE:
•
Once a heat setting is selected, heat will
be felt within two to five minutes.
•
The engine must be running for the
heated seats to operate.
81