RAM 2015 1500, Operating Information Manual, Page: 79 / 998

If the mirror is manually folded after electrically
cycled, a potential extra button push is required
to get the mirrors back to the home position. If
the mirror does not electrically fold check for ice
or dirt build up at the pivot area which can cause
excessive drag.
Resetting the Power Folding Outside Mir-
rors
You may need to reset the power folding mirrors
if the following occurs:
•
The mirrors are accidentally blocked while
folding.
•
The mirrors are accidentally manually
folded/unfolded.
•
The mirrors come out of the unfolded
position.
•
The mirrors shake and vibrate at normal
driving speeds.
To reset the power folding mirrors: Fold and
unfold them by pressing the button (this may
require multiple button pushes). This resets
them to their normal position.
NOTE:
•
The power fold mirrors are designed to
operate while the vehicle is stationary or
traveling at moderate speeds. If you at-
tempt to power fold the mirrors at high
speeds they may not fully open or close.
You should slow down to a moderate
speed and complete the operation.
•
When pressing the power fold button 10
or more times in one minute the system
shuts down for one minute to protect the
motors from over heating.
Power Mirrors — If Equipped
The controls for the power mirrors are located
on the driver’s door trim panel.
The power mirror controls consist of mirror
select buttons and a four-way mirror control
switch.
Power Folding Mirror Switch
Power Mirror Controls Location
76