RAM 2015 1500, Operating Information Manual, Page: 64 / 998

3. Pass the tether strap hook under the head
restraint behind the child seat, though the
tether strap loop behind the seat and over to
the right or left outboard tether strap loop.
4. Attach the hook to the outboard tether strap
loop (see diagram). Tighten the tether strap
according to the child seat manufacturer’s
instructions.
Installing Three Child Restraints:
1. Place a child restraint on each outboard rear
seat. Route the tether straps following the di-
rections for right and left seating positions,
above.
2. Attach both hooks to the center tether strap
loop, but do not tighten the straps yet.
3. Place a child restraint on the center rear seat.
Route the tether strap following the directions for
the center seating position, above.
4. Attach the hook to the outboard tether strap
loop.
5. Tighten the tether straps according to the
child seat manufacturer’s instructions, tight-
ening the right and left tether straps before
the center tether strap.
Tether Strap Through Center Tether Strap
Loop
Tether Strap Through Center Tether Strap
Loop And Attached To Outboard Tether Strap
Loop
Left Outboard And Center Seating Position
Shown
61