RAM 2015 1500, Operating Information Manual, Page: 404 / 998

Block both the front and rear of the wheel
diagonally opposite the jacking position. For
example, if the right front wheel is being
changed, block the left rear wheel.
NOTE:
Passengers should not
remain in the vehicle
when the vehicle is be-
ing jacked.
Jack Instructions
(2500, 3500 Series)
WARNING!
Carefully follow these tire changing warnings
to help prevent personal injury or damage to
your vehicle:
•
Always park on a firm, level surface as far
from the edge of the roadway as possible
before raising the vehicle.
(Continued)
WARNING! (Continued)
•
Turn on the Hazard Warning flasher.
•
Block the wheel diagonally opposite the
wheel to be raised.
•
Set the parking brake firmly and set an
automatic transmission in PARK; a manual
transmission in REVERSE.
•
Never start or run the engine with the
vehicle on a jack.
•
Do not let anyone sit in the vehicle when it
is on a jack.
•
Do not get under the vehicle when it is on
a jack. If you need to get under a raised
vehicle, take it to a service center where it
can be raised on a lift.
•
Only use the jack in the positions indicated
and for lifting this vehicle during a tire
change.
•
If working on or near a roadway, be ex-
tremely careful of motor traffic.
(Continued)
WARNING! (Continued)
•
To assure that spare tires, flat or inflated,
are securely stowed, spares must be
stowed with the valve stem facing the
ground.
Jack Warning Label
Lug Wrench Adaptor Shown In Jack And Tools
Assembly
401