RAM 2015 1500, Operating Information Manual, Page: 222 / 998

Air Conditioning Operation
Push the A/C button to
engage the Air Condi-
tioning (A/C). A LED will
illuminate when the A/C
system is engaged.
MAX A/C
For maximum cooling, when MAX A/C is se-
lected the A/C is turned on automatically and
the air is recirculated.
NOTE:
A/C cannot be deselected when in MAX A/C
position. The LED will blink three times if the
A/C button is pushed. If your air condition-
ing performance seems lower than ex-
pected, check the front of the A/C condenser
(located in front of the radiator), for an
accumulation of dirt or insects. Clean with a
gentle water spray from behind the radiator
and through the condenser. Fabric front
fascia protectors may reduce airflow to the
condenser, reducing air conditioning perfor-
mance.
Mode Control (Air Direction)
Mode control allows you
to choose from several
patterns of air distribu-
tion. You can select ei-
ther a primary mode, as
identified by the symbols,
or a blend of two of these
modes. The closer the
control is to a particular
mode, the more air distri-
bution you receive from that mode.
Panel Mode
Air is directed through the outlets in the
instrument panel. These outlets can be
adjusted to direct airflow.
Bi-Level Mode
Air is directed through the panel and
floor outlets.
NOTE:
There is a difference in temperature (in any
conditions other than full cold or full hot),
between the upper and lower outlets for
added comfort. The warmer air goes to the
floor outlets. This feature gives improved
comfort during sunny but cool conditions.
Floor Mode
Air is directed through the floor outlets
with a small amount through the de-
frost and side window demist outlets.
219