RAM 2015 1500, Operating Information Manual, Page: 185 / 998

NOTE:
Use the steering wheel DID controls for the
following procedure(s).
Vehicles Equipped With Passive Entry
1. Without pushing the brake pedal, push the
ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not start
the engine).
2. Push and release the DOWN arrow button to
scroll downward through the main menu to
“Vehicle Info.”
3. Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
4. Push and hold the RIGHT arrow button for
one second to access the ”Oil Life Reset”
screen.
5. Push and release the DOWN arrow button to
select “Yes,” then push and release the Right
arrow button to select reset of the Oil Life.
6. Push and release the Up arrow button to exit
the DID screen.
Vehicles Not Equipped With Passive Entry
1. Without pushing the brake pedal, cycle the
ignition to the ON/RUN position (do not start
the engine).
2. Push and release the DOWN arrow button to
scroll downward through the main menu to
“Vehicle Info.”
3. Push and release the RIGHT arrow button to
access the ”Oil Life” screen.
4. Push and hold the RIGHT arrow button for
one second to access the ”Oil Life Reset”
screen.
5. Push and release the DOWN arrow button to
select “Yes”, then push and release the Right
arrow button to select reset of the Oil Life.
6. Push and release the Up arrow button to exit
the DID screen.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indica-
tor system did not reset. If necessary, repeat
this procedure.
DID Messages
•
Front Seatbelts Unbuckled
•
Driver Seatbelt Unbuckled
•
Passenger Seatbelt Unbuckled
•
Service Airbag System
•
Traction Control Off
•
Washer Fluid Low
•
Oil Pressure Low
•
Oil Change Due
•
Fuel Low
•
Service Antilock Brake System
•
Service Electronic Throttle Control
•
Service Power Steering
•
Cruise Off
•
Cruise Ready
•
Cruise Set To XXX MPH
•
Tire Pressure Screen With Low Tire(s) “In-
flate Tire to XX”
•
Tire Pressure Information System (TPIS)
182