RAM 2015 1500, Operating Information Manual, Page: 104 / 998

DRIVER ADJUSTABLE PEDALS
— IF EQUIPPED
The adjustable pedals system is designed to
allow a greater range of driver comfort for
steering wheel tilt and seat position. This fea-
ture allows the brake, accelerator, and clutch
pedals (if equipped) to move toward or away
from the driver to provide improved position with
the steering wheel.
The adjustable pedal switch is located to the left
side of the steering column.
•
The pedals can be adjusted with the ignition
OFF.
•
The pedals cannot be adjusted when the
vehicle is in REVERSE or when the Elec-
tronic Speed Control System is on. The fol-
lowing messages will be displayed on ve-
hicles equipped with the Electronic Vehicle
Information System (EVIC) or Driver Informa-
tion Display (DID) if the pedals are attempted
to be adjusted when the system is locked out
(“Adjustable Pedal Disabled — Cruise Con-
trol Engaged” or “Adjustable Pedal Disabled
— Vehicle In Reverse”.
NOTE:
•
Always adjust the pedals to a position
that allows full pedal travel.
•
Further small adjustments may be neces-
sary to find the best possible seat/pedal
position.
•
For vehicles equipped with Driver
Memory Seat, you can use your Remote
Keyless Entry (RKE) transmitter or the
memory switch on the driver’s door trim
panel to return the adjustable pedals to
pre-programmed
positions. Refer to
“Driver Memory Seat” in “Understanding
The Features Of Your Vehicle” for further
information.
CAUTION!
Do not place any article under the adjustable
pedals or impede its ability to move as it may
cause damage to the pedal controls. Pedal
travel may become limited if movement is
stopped by an obstruction in the adjustable
pedal’s path.
WARNING!
Do not adjust the pedals while the vehicle is
moving. You could lose control and have an
accident. Always adjust the pedals while the
vehicle is parked.
Adjustable Pedals Switch
101