RAM 2014 5500, Owner'S Manual

Page: 242 / 370

NOTE: Single set speed can be programmed via the
PTO menu on the EVIC screen. Further details are
available at the Ram Truck Bodybuilders website.
www.rambodybuilder.com www.ramtrucks.com .
Mobile Mode
To operate the PTO in this mode the vehicle must meet
the following conditions:
•
Mobile mode is activated via the menu on the EVIC
screen.
•
(ON/OFF) switch has been activated.
•
Vehicles with automatic transmission must be in PARK
or DRIVE.
•
Parking brake must not be applied.
•
Brake pedal must not be applied.
•
No vehicle, brake or clutch switch faults present.
•
Vehicle engine must be running.
•
PTO must be correctly installed using the vehicle
provided circuits.
The customer may choose to use the PTO while the
vehicle is moving. To do so, the PTO function must be
activated prior to taking the vehicle out of PARK. This is
accomplished by activating the upfitter-provided PTO
on/off switch. At this point, the customer may place the
vehicle in a forward or reverse gear and have PTO
operation once the vehicle begins to move. To disengage
PTO operation and return to “standard vehicle opera-
tion” simply toggle the on/off switch to the OFF position.
240 STARTING AND OPERATING