RAM 1500 2WD 2021 Owner'S Manual Download Page 62

Page: 62 / 496

GETTING TO KNOW YOUR VEHICLE



Transmission In NEUTRAL Position — When

the ignition is ON, and the automatic transmis

sion is in the NEUTRAL position, the Rain

Sensing system will not operate until the wiper

switch is moved, vehicle speed is greater than

3 mph (5 km/h), or the gear selector is moved

out of the NEUTRAL position.



Remote Start Mode Inhibit — On vehicles

equipped with Remote Start system, Rain

Sensing wipers are not operational when the

vehicle is in the remote start mode.

CLIMATE CONTROLS

The Climate Control system allows you to

regulate the temperature, air flow, and direction

of air circulating throughout the vehicle. The

controls are located on the touchscreen (if

equipped), on the sides of the touchscreen or

on the instrument panel below the radio.

UTOMATIC

LIMATE

ONTROL

ESCRIPTIONS

UNCTIONS

Uconnect 4/4C/4C NAV With 8.4-inch Display Auto

matic Temperature Controls

Uconnect 4C NAV With 12-inch Display Automatic Tem

perature Controls

NOTE:

Icons and descriptions can vary based upon

vehicle equipment.

MAX A/C Button

Press and release the MAX A/C button

on the touchscreen to change the

current setting to the coldest output

of air. The MAX A/C indicator

illuminates when MAX A/C is on. Pressing the

button again will cause the MAX A/C operation

to exit.

NOTE:

The MAX A/C button is only available on the

touchscreen.

A/C Button

Press and release this button on the

touchscreen, or push the button on

the faceplate to change the current

setting. The A/C indicator illuminates

when A/C is on.

21_DT_OM_EN_USC_t.book Page 60

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands