RAM 1500 2WD 2021 Owner'S Manual Download Page 477

Page: 477 / 496

TECHNICAL SPECIFICATIONS

475

ENGINE FLUIDS AND LUBRICANTS

Component

Fluid, Lubricant, or Genuine Part

Gas Engine Coolant

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)

Formula OAT (Organic Additive Technology).

Motor Generator Unit – 3.6L Engine (If Equipped)

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)

Formula OAT (Organic Additive Technology).

Engine Oil – 3.6L Engine

We recommend you use API Certified SAE 0W-20 engine oil, meeting the requirements of FCA

Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil

filler cap for correct SAE grade.

Engine Oil – 5.7L Engine

We recommend you use API Certified SAE 5W-20 engine oil, meeting the requirements of FCA

Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil

filler cap for correct SAE grade.

Gas Engine Oil Filter

We recommend you use Mopar brand engine oil filters.

Fuel Selection – 3.6L Engine

87 Octane (R+M)/2 Method, 0-15% ethanol (Do not use E-85).

Fuel Selection – 5.7L Engines

89 Octane Recommended - 87 Octane Acceptable (R+M)/2 Method, 0-15% ethanol (Do not

use E-85).

Diesel Engine Coolant

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km)

Formula OAT (Organic Additive Technology).

Engine Oil — 3.0L Turbo Diesel Engine

We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material

Standard MS-12991 and the API SN engine oil category is required.

Diesel Engine Oil Filter

We recommend you use Mopar engine oil filters. Using an oil filter that does not meet FCA’s

filtration requirements can severely impact engine life and reliability.

21_DT_OM_EN_USC_t.book Page 475

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands