RAM 1500 2WD 2021 Owner'S Manual Download Page 43

Page: 43 / 496

GETTING TO KNOW YOUR VEHICLE

Rear Head Restraints

The outboard head restraints are

non-adjustable, but can be folded down for

improved rearward visibility. Push the button on

the outboard side of the head restraint to

release. To return the head restraint to its

upright position, push up on the head restraint

until it locks back into place.

Release Button

The center head restraint is not adjustable or

removable.

NOTE:

The head restraints should only be removed by

qualified technicians, for service purposes only.

If any of the head restraints require removal,

see an authorized dealer.

For child restraint tethering

page 334.

UCONNECT VOICE RECOGNITION

NTRODUCING

OICE

ECOGNITION

Start using Uconnect Voice Recognition with

these helpful quick tips. It provides the key

Voice Commands and tips you need to know to

control your vehicle’s Voice Recognition (VR)

system.

Uconnect 3 With 5-inch Display

WARNING!



All occupants, including the driver, should

not operate a vehicle or sit in a vehicle’s

seat until the head restraints are placed in

their proper positions in order to minimize

the risk of neck injury in the event of a

crash.



Head restraints should never be adjusted

while the vehicle is in motion. Driving a

vehicle with the head restraints improperly

adjusted or removed could cause serious

injury or death in the event of a collision.

WARNING!

Sitting in a seat with the head restraint in its

lowered position could result in serious injury

or death in a collision. Always make sure the

outboard head restraints are in their upright

positions when the seat is to be occupied.

21_DT_OM_EN_USC_t.book Page 41

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands