RAM 1500 2WD 2021 Owner'S Manual Download Page 41

Page: 41 / 496

GETTING TO KNOW YOUR VEHICLE

Rear Heated Seats — If Equipped

On some models, the two rear outboard seats

may be equipped with heated seats. There are

two heated seat switches that allow the rear

passengers to operate the seats independently.

The heated seat switches for each heater are

located on the rear of the center console.
There are two heated seat switches that allow

the rear passengers to operate the seats

independently. You can choose from HI, MED,

LO, or OFF heat settings. Amber indicator lights

in each switch indicate the level of heat in use.



Push the heated seat button once to turn

the HI setting on.



Push the heated seat button a second

time to turn the MED setting on.



Push the heated seat button a third time

to turn the LO setting on.



Push the heated seat button a fourth time

to turn the heating elements off.

NOTE:

The level of heat selected will stay on until the

operator changes it.

ENTILATED

EATS

— I

QUIPPED

Front Ventilated Seats

The ventilated seats are equipped with fans

that can be controlled through the climate and

control screen in the Uconnect system. The fans

operate at three speeds, HI, MED and LO.



Press the ventilated seat button once to

choose HI.



Press the ventilated seat button a second

time to choose MED.



Press the ventilated seat button a third

time to choose LO.



Press the ventilated seat button a fourth

time to turn the ventilation off.

NOTE:

The engine must be running for the ventilated

seats to operate.

Rear Ventilated Seats — If Equipped

If equipped, the two outboard rear seats will

have ventilated seats. The rear ventilated seat

control switches are located on the rear of the

center console.
There are two ventilated seat switches that

allow the rear passengers to operate the seats

independently. The fans operate at three

speeds: HI, MED, and LO. Push the ventilated

seat buttons to toggle through the speeds, or to

turn the feature off.

NOTE:

The engine must be running for the ventilated

seats to operate.

LASTIC

ROCERY

ETAINERS

Retainer hooks which will hold plastic grocery

bag handles are attached to the underside of

the rear seat cushion. To access these hooks,

lift the rear seat cushion upward.

21_DT_OM_EN_USC_t.book Page 39

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands