RAM 1500 2WD 2021 Owner'S Manual Download Page 179

Page: 179 / 496

STARTING AND OPERATING

177

ANUALLY

URN

TOP

TART

YSTEM

Push the Stop/Start OFF switch (located on the

switch bank). The light on the switch will turn

off.

YSTEM

ALFUNCTION

If there is a malfunction in the Stop/Start

system, the system will not shut down the

engine. A “SERVICE STOP/START SYSTEM”

message will appear in the instrument cluster

display

page 126.

The system will need to be checked by an

authorized dealer.

CRUISE CONTROL SYSTEMS — IF EQUIPPED

Your vehicle may be equipped with the Cruise

Control system, or the Adaptive Cruise Control

(ACC) system:



Cruise Control for cruising at a constant

preset speed.



Adaptive Cruise Control (ACC) for maintaining

a set distance between you and the vehicle

ahead using Fixed Speed Cruise Control to

automatically adjust the preset speed.

NOTE:

In vehicles equipped with ACC, if an ACC

distance is not set, Fixed Speed Cruise Control

will not detect vehicles directly ahead of you.

Always be aware of the mode selected.

RUISE

ONTROL

— I

QUIPPED

When engaged, the Cruise Control takes over

accelerator operations at speeds greater than

20 mph (32 km/h).
The Cruise Control buttons are located on the

right side of the steering wheel.

Cruise Control Buttons

NOTE:

In order to ensure proper operation, the Cruise

Control system has been designed to shut down

if multiple Cruise Control functions are operated

at the same time. If this occurs, the Cruise

Control system can be reactivated by pushing

the Cruise Control on/off button and resetting

the desired vehicle set speed.

To Activate

Push the on/off button to activate the Cruise

Control. The cruise indicator light in the

instrument cluster display will illuminate. To

turn the system off, push the on/off button a

1 — CANC/Cancel
2 — SET (+)/Accel
3 — On/Off

4 — RES/Resume
5 — SET (-)/Decel

WARNING!

Cruise Control can be dangerous where the

system cannot maintain a constant speed.

Your vehicle could go too fast for the

conditions, and you could lose control and

have an accident. Do not use Cruise Control

in heavy traffic or on roads that are winding,

icy, snow-covered or slippery.

21_DT_OM_EN_USC_t.book Page 177

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands