Forward and Reverse Light Switches
When either button is pressed the corresponding light
on the outside mirror will remain on for ten minutes.
The vehicle must be in the ON/RUN or ACC position.
When the light is active, the switch on the door panel
will illuminate. Pushing the switch a second time will
turn the lights off.
Forward Utility Light
Reverse Guidance Light
When the lights are activated using the switch on the
door panel, the reverse guidance lights will illuminate
when the vehicle transmission is in PARK, NEUTRAL, or
REVERSE and the forward utility lights will illuminate in
all ignition positions. The rear guidance lights will turn
off when the vehicle transmission is placed in DRIVE.
The rear guidance lights will also illuminate when
the cargo light switch is pressed on the headlight
switch panel. This feature is programmable through the
Uconnect system
H
EATED
M
IRRORS
— I
F
E
QUIPPED
These mirrors are heated to melt frost or
ice. This feature will be activated whenever
you turn on the rear window defroster (if
equipped)
.
NOTE:
If equipped, mirrors may be installed with
Electrochromic (EC) glass. EC glass may defrost slower
than non-EC glass due to the thickness of the material.
UNIVERSAL GARAGE DOOR OPENER
(HOMELINK®) — IF EQUIPPED
HomeLink® Buttons
●
HomeLink® replaces up to three
hand-held transmitters that operate
devices such as garage door
openers, motorized gates, lighting,
or home security systems. The
HomeLink® unit is powered by your
vehicle’s 12 Volt battery.
●
The HomeLink® buttons that are located in the
overhead console or sun visor designate the three
different HomeLink® channels.
●
To operate HomeLink®, push and release any of the
programmed HomeLink® buttons. These buttons will
activate the devices they are programmed to with
each press of the corresponding HomeLink® button.
●
The HomeLink® indicator light is located above the
center button.
Scan me
GETTING TO KNOW YOUR VEHICLE 47
2
