RAM 1500 2023 Owner'S Manual Download Page 79

Page: 79 / 416

GETTING TO KNOW YOUR VEHICLE

5. Remove the connector bracket from the sill by

pushing inward in the locking tab.

Connector Bracket Location

Locking Tab

6. Disconnect the wiring harness by pushing on the two

release tabs, ensuring the connector bracket does

not fall into the sill.

Connected Wiring Harness

Disconnected Body Side Harness

7. Connect the body side plug (provided in the glove

compartment) to the body side wiring harness and

insert the bracket back into the sill.

Body Side Plug (One Piece)

8. Connect the tailgate plugs (provided in the glove

compartment) to the tailgate wiring harness to

ensure that the terminals do not corrode.

Tailgate Plugs (Two Pieces)

1 — First Release Tab
2 — Second Release Tab

1 — Large Plug
2 — Small Plug

23_DT_OM_EN_USC_t.book Page 77

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

RAM 1500 2023, Owner'S Manual, Page: 79 / 416

Search results

Summary of Contents for 1500 2023

Reviews: