RAM 1500 2023 Page 37 Owner'S Manual Download

Page: 37 / 416

GETTING TO KNOW YOUR VEHICLE

NOTE:

Do not reverse the head restraints (making the rear of the

head restraint face forward) in an attempt to gain addi

tional clearance to the back of your head.

Front Head Restraints

Your vehicle is equipped with front four-way driver and

passenger head restraints.
To raise the head restraint, pull upward on the head

restraint. To lower the head restraint, push the adjustment

button, located at the base of the head restraint, and push

downward on the head restraint.

NOTE:

The head restraints should only be removed by qualified

technicians, for service purposes only. If either of the head

restraints require removal, see an authorized dealer.

Head Restraint Adjustment Button Location

To adjust the head restraint forward, pull the top of the

head restraint toward the front of the vehicle as desired

and release. To adjust the head restraint rearward, pull

the top of the head restraint to the forward most position

and release. The head restraint will return to the rear most

position.

Upright Position

Forward Adjustment

NOTE:

If your vehicle is equipped with a front bench seat, the

center head restraint is not adjustable or removable.

WARNING!



All occupants, including the driver, should not

operate a vehicle or sit in a vehicle’s seat until the

head restraints are placed in their proper positions in

order to minimize the risk of neck injury in the event

of a crash.



Head restraints should never be adjusted while the

vehicle is in motion. Driving a vehicle with the head

restraints improperly adjusted or removed could

cause serious injury or death in the event of a

collision.

WARNING!



All occupants, including the driver, should not

operate a vehicle or sit in a vehicle’s seat until the

head restraints are placed in their proper positions in

order to minimize the risk of neck injury in the event

of a crash.



Head restraints should never be adjusted while the

vehicle is in motion. Driving a vehicle with the head

restraints improperly adjusted or removed could

cause serious injury or death in the event of a

collision.

23_DT_OM_EN_USC_t.book Page 35

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands