RAM 1500 2023 Page 163 Owner'S Manual Download

Page: 163 / 416

STARTING AND OPERATING

161

LANESENSE — IF EQUIPPED

ANE

ENSE

PERATION

The LaneSense system is operational at speeds above

37 mph (60 km/h) and below 112 mph (180 km/h).

The LaneSense system uses a forward looking camera to

detect lane markings and measure vehicle position within

the lane boundaries.
When both lane markings are detected and the driver

drifts out of the lane (no turn signal applied), the

LaneSense system provides a haptic warning in the form

of torque applied to the steering wheel, as well as a visual

warning in the instrument cluster display, to prompt the

driver to remain within the lane boundaries.
The driver may manually override the haptic warning by

applying force to the steering wheel at any time.
When only a single lane marking is detected and the driver

drifts across the lane marking (no turn signal applied), the

LaneSense system provides a visual warning through the

instrument cluster display to prompt the driver to remain

within the lane.
When only a single lane marking is detected, a haptic or a

torque warning will not be provided.

NOTE:



When operating conditions have been met, the Lane

Sense system will monitor if the driver’s hands are on

the steering wheel and provide an audible and visual

warning to the driver if removed. The system will cancel

if the driver does not return their hands to the wheel.



LaneSense will disable when a snowplow is connected

to the vehicle.

URNING

ANE

ENSE

The LaneSense button is located on the switch

panel below the Uconnect display.

NOTE:

If your vehicle is equipped with a 12-inch Uconnect Display

screen, the LaneSense button is located above the

display.
To turn the LaneSense system on, push the LaneSense

button (LED turns off). A “LaneSense On” message is

shown in the instrument cluster display.
To turn the LaneSense system off, push the LaneSense

button again (LED turns on).

NOTE:

The LaneSense system will retain the last system state on

or off from the last ignition cycle when the ignition is

placed in the ON/RUN position.

ANE

ENSE

ARNING

ESSAGE

The LaneSense system will indicate the current lane drift

condition through the instrument cluster display.
When the LaneSense system is on, the lane lines are gray

when both of the lane boundaries have not been detected
and the LaneSense telltale

is solid white.

System ON (Gray Lines) With White Telltale

23_DT_OM_EN_USC_t.book Page 161

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands