RAM 1500 2023 Page 73 Owner'S Manual Download

Page: 73 / 416

GETTING TO KNOW YOUR VEHICLE

To close the window part way, lift the window switch briefly

and release it when you want the window to stop.
If the window runs into any obstacle during auto-closure, it

will reverse direction and then go back down. Remove the

obstacle and use the window switch again to close the

window.

NOTE:

Any impact due to rough road conditions may trigger the

auto-reverse function unexpectedly during auto-closure.

If this happens, pull the switch lightly and hold to close the

window manually.

ESET

UTO

-U

Should the Auto-Up feature stop working, the window

probably needs to be reset. To reset Auto-Up:
1. Pull the window switch up to close the window

completely and continue to hold the switch up for an

additional two seconds after the window is closed.

2. Push the window switch down firmly to open the

window completely and continue to hold the switch

down for an additional two seconds after the window

is fully open.

INDOW

OCKOUT

WITCH

The window lockout switch on the driver's door trim panel

allows you to disable the window controls on the rear

passenger doors. To disable the window controls, push

and release the window lockout button (the indicator light

on the button will turn on). To enable the window controls,

push and release the window lockout button again

(the indicator light on the button will turn off).

Window Lockout Switch

OWER

LIDING

EAR

INDOW

—

QUIPPED

The switch for the power sliding rear window is located on

the overhead console. Push the switch rearward to open

the glass. Pull the switch forward to close the glass.

Rear Window Switch

ANUAL

LIDING

EAR

INDOW

—

QUIPPED

A locking device in the center of the window helps to

prevent entry from the rear of the vehicle. Squeeze the

lock to release the window.

Manual Rear Window Lock

WARNING!

There is no anti-pinch protection when the window is

almost closed. To avoid personal injury be sure to clear

your arms, hands, fingers and all objects from the

window path before closing.

23_DT_OM_EN_USC_t.book Page 71

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands