RAM 1500 2023 Page 371 Owner'S Manual Download

Page: 371 / 416

SERVICING AND MAINTENANCE

369

2. Pull the outboard side of the lamp rearward far

enough to unsnap the two receptacles on the

outboard side of the lamp housing from the two

plastic snap post retainers in the outer box side

panel.

Tail Lamp Removal

3. Disconnect the wiring harness connectors from the

bulb socket.

Wiring Harness Connector

4. Rotate the bulb socket counterclockwise a quarter

turn to unlock it from the housing.

5. Pull the bulb straight out of the socket.

6. Reverse the procedure to install the bulb and

housing.

CENTER HIGH MOUNTED STOP LAMP (CHMSL)

WITH CARGO LAMP

See the following steps to replace:
1. Remove the four screws holding the housing/lens to

the body as shown.

CHMSL Mounting Screw Locations

2. Separate the connector holding the housing and

wiring harness to the body.

CHMSL Bulb Location

3. Turn the desired bulb socket a quarter turn counter

clockwise and remove the socket and bulb from

housing.

4. Pull the desired bulb straight from the socket.



Outside Bulbs: Cargo Lamps



Inside Bulb: Center High Mounted Stop Lamp

5. Reverse the procedure for installation of bulbs and

housing.

CAUTION!

Do not contaminate the bulb glass by touching it with

your fingers or by allowing it to contact other oily

surfaces. Shortened bulb life will result.

CAUTION!

Do not contaminate the bulb glass by touching it with

your fingers or by allowing it to contract other oily

surfaces. Shortened bulb life will result.

23_DT_OM_EN_USC_t.book Page 369

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands