manualshive.com logo in svg

RAM 1500 2023, Owner'S Manual

The RAM 1500 2023 Owner's Manual is available for free download on our website. Get your hands on the comprehensive manual packed with vital information for your RAM 1500. Explore its features and functions, troubleshooting tips, and more. Download your copy now from manualshive.com.

Share
Download
background image

124

STARTING AND OPERATING

 

(Continued)

SafeHold

SafeHold is a safety feature of the Electric Park Brake 

(EPB) system that will engage the parking brake 

automatically if the vehicle is left unsecured while the 

ignition is in ON/RUN.
The parking brake will automatically engage if all of the 

following conditions are met:

The vehicle is at a standstill.

There is no attempt to press the brake pedal and accel

-

erator pedal.

The seat belt is unbuckled.

The driver door is open.

SafeHold can be temporarily bypassed by pushing the EPB 

switch while the driver door is open. Once manually 

bypassed, SafeHold will be enabled again once the vehicle 

reaches 12 mph (20 km/h) or the ignition is turned to the 

OFF position and back to ON again.

Brake Service Mode

We recommend having your brakes serviced by an 

authorized dealer. You should only make repairs for which 

you have the knowledge and the right equipment. 

You should only enter Brake Service mode during 

brake service.

When servicing your rear brakes, it may be necessary for 

you or your technician to push the rear piston into the rear 

caliper bore. With the Electric Park Brake (EPB) system, 

this can only be done after retracting the EPB actuator. 

Fortunately, actuator retraction can be done easily by 

entering the Brake Service mode through the Uconnect 

Settings in your vehicle. This menu-based system will 

guide you through the steps necessary to retract the EPB 

actuator in order to perform rear brake service.
Service Mode has requirements that must be met in order 

to be activated:

The vehicle must be at a standstill.

The parking brake must be unapplied.

The transmission must be in PARK or NEUTRAL.

While in Service Mode, the EPB Warning Light will flash 

continuously while the ignition is in ON/RUN.
When brake service work is complete, the following steps 

must be followed to reset the park brake system to normal 

operation:

Ensure the vehicle is at a standstill.

Press the brake pedal with moderate force.

Apply the EPB Switch.

AUTOMATIC TRANSMISSION 

You must press and hold the brake pedal while shifting out 

of PARK.

WARNING!

You can be badly injured working on or around a motor 

vehicle. Do only that service work for which you have 

the knowledge and the right equipment. If you have any 

doubt about your ability to perform a service job, take 

your vehicle to a competent mechanic.

WARNING!

Never use the PARK position as a substitute for the 

parking brake. Always apply the parking brake fully 

when exiting the vehicle to guard against vehicle 

movement and possible injury or damage.

Your vehicle could move and injure you and others if 

it is not in PARK. Check by trying to move the trans

-

mission gear selector out of PARK with the brake 

pedal released. Make sure the transmission is in 

PARK before exiting the vehicle.

The transmission may not engage PARK if the vehicle 

is moving. Always bring the vehicle to a complete 

stop before shifting to PARK, and verify that the 

transmission gear position indicator solidly indicates 

PARK (P) without blinking. Ensure that the vehicle is 

completely stopped, and the PARK position is prop

-

erly indicated, before exiting the vehicle.

It is dangerous to shift out of PARK or NEUTRAL if the 

engine speed is higher than idle speed. If your foot is 

not firmly pressing the brake pedal, the vehicle could 

accelerate quickly forward or in reverse. You could 

lose control of the vehicle and hit someone or 

something. Only shift into gear when the engine is 

idling normally and your foot is firmly pressing the 

brake pedal.

23_DT_OM_EN_USC_t.book  Page 124  

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 1500 2023

Ecco EW4010 Installation And Operation Instructions Manual preview
EW4010
Brand: Ecco Pages: 9
Ecco EW4009 Installation And Operation Instructions Manual preview
EW4009
Brand: Ecco Pages: 9
TATA Motors Indigo Owner'S Manual & Service Book preview
Indigo
Brand: TATA Motors Pages: 164
Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
Jaeger 21010508J Fitting Instructions Manual preview
21010508J
Brand: Jaeger Pages: 14
Whelen Engineering Company 12H4S140 Installation Manual preview
12H4S140
Brand: Whelen Engineering Company Pages: 4
Mercedes-Benz GLC 2020 Operator'S Manual preview
GLC 2020
Brand: Mercedes-Benz Pages: 66
SAAS MUSCLE Series Quick Start Manual preview
MUSCLE Series
Brand: SAAS Pages: 3
Nuna Pipa TW 2 Manual preview
Pipa TW 2
Brand: Nuna Pages: 29

Brands by name

Popular brands

Load more brands