Specifications
Power Cable
RF Jack
Power Jack
Operation
LEDs & Power Switch
rammount.com
1.800.497.7479
[email protected]
RAM
®
Tough-Dock
™
for Panasonic Toughbook CF-28, 29, 30 & 31
Black wire: Ground
White wire: 12-28vdc
Co-axial
RMR-INS-234-PAN1
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
To see more mounting options, visit rammount.com
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle
operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
1
Place Toughbook on RAM
®
Tough-Dock
™
front edge first.
Then use brass locating pins to align back edge.
2
Pull latch forward until lock engages.
Turn lock clockwise to lock; counter-clockwise to release.
Power IN
:
Indicates 12-28vdc is supplied to Toughbook. (RAM
®
Tough-Dock
™
draws 3 amps from a
13.8V source to power RAM
®
Tough-Dock
™
and Toughbook)
Power OUT
:
Indicates 15.6vdc is available for Toughbook.
Docked
:
Indicates Toughbook is docked with
RAM
®
Tough-Dock
™
when Toughbook is powered on.
Switched ON
:
Power is supplied to Toughbook and Port Replicator from external source.
Switched OFF
:
If Toughbook is ON and docked, RAM
®
Tough-Book
™
will supply power to Port Replicator.
POWER
IN
POWER
OUT
DOCKED
ON
Ground
+12-28V