RAM Commercial ProMaster 2024, Owner'S Manual, Page: 51 / 284

AUTOMATIC HEADLIGHTS WITH
WIPERS
If your vehicle is equipped with Automatic Headlights, it
also has this customer-programmable feature. When
your headlights are in the automatic mode and the
engine is running, they will automatically turn on when
the wiper system is on. This feature is programmable
through the Uconnect system
page 136.
If your vehicle is equipped with the Rain Sensing Wiper
system
page 53, and it is activated, the headlights
will automatically turn on after the wipers complete five
wipe cycles within approximately one minute. They will
turn off approximately four minutes after the wipers
completely stop.
NOTE:
When your headlights come on during the daytime, the
instrument panel lights will automatically dim to the
lower nighttime intensity.
PARKING LIGHTS
These lights can be turned on, with the ignition in the
OFF position, by rotating the end of the multifunction
lever from O (off) position and then to the headlight
position.
HEADLIGHT DELAY
When this feature is selected, the driver can choose to
have the headlights remain on for a preset period of
time after the engine is turned off.
Activation
To activate the delay feature, place the ignition in the
OFF position while the headlights are still on. Then,
rotate the multifunction lever to the O (off) position
within two minutes. The delay interval begins when the
headlight switch is turned from O (off) to the low beam
position. If the headlight switch is in AUTO position and
headlights were on before the ignition is OFF, the delay
interval begins automatically.
Deactivation
The feature is disabled by turning on the headlights, the
parking lights or by placing the ignition in the RUN posi-
tion. If you shut off the lights before the ignition is
turned on, they will turn off in the normal manner.
Headlights with ignition in the OFF position.
With the ignition in the OFF position, the headlights can
be switched on for a maximum time of 8 minutes. To
turn on the headlights with the ignition in the OFF posi-
tion, turn the end of the multifunction lever to the head-
light position.
NOTE:
If the headlight delay function is disabled in the
Uconnect Setting, when you put the ignition in the OFF
position with the multifunction lever already set in the
headlight ON position, the headlights remain on for
8 minutes.
FOG LIGHTS — IF EQUIPPED
The fog light switch is located on the instru-
ment panel to the left of the steering
column.
To activate the front fog lights, turn on the parking lights
or the low beam headlights and push the fog light but-
ton. To turn off the front fog lights, push the fog light
button a second time or turn off the headlight switch.
An indicator light in the instrument cluster illuminates
when the fog lights are turned on.
NOTE:
The fog lights will operate with the low beam headlights
or parking lights on. Selecting the high beam headlights
will turn off the fog lights.
If the vehicle’s ignition is turned off, the fog lights will
also turn off.
Cornering Lights
The cornering lights are a feature to improve visibility at
night while turning the vehicle. When activated, a light
incorporated in the front fog light will illuminate on the
side of the vehicle the steering wheel is rotated or the
turn signal indicator is on. It can be activated through
the Uconnect system
page 136.
GETTING TO KNOW YOUR VEHICLE 49
2