RAM Commercial PROMASTER 2022 Page 66 Owner'S Manual Download

Page: 66 / 284

GETTING TO KNOW YOUR INSTRUMENT PANEL

Towing Hook Breakdown Warning Light —

If Equipped

This light illuminates when there is a

failure with the tow hook. Contact an

authorized dealer for service.

Transmission Temperature Warning Light

This warning light will illuminate to warn

of a high transmission fluid temperature.

This may occur with strenuous usage

such as trailer towing. If this light turns

on, stop the vehicle and run the engine at idle or

slightly faster, with the transmission in PARK (P) or

NEUTRAL (N), until the light turns off. Once the light

turns off, you may continue to drive normally.

ELLOW

NDICATOR

IGHTS

Forward Collision Warning (FCW) OFF

Indicator Light — If Equipped

This indicator light will illuminate when

you switch FCW off or when driving

conditions obscure the sensor with snow,

heavy rain, or sun.

TOW/HAUL Indicator Light

This indicator light will illuminate when

TOW/HAUL mode is selected

page 112.

Keyless System Failure Light

The telltale will illuminate in the event of

keyless system failure.

Contact an authorized dealer as soon as possible.

Rain Sensor Failure Light

The telltale will illuminate in the case of

failure of the automatic windshield wiper.

Contact an authorized dealer as soon as

possible.

CAUTION!

The TPMS has been optimized for the original

equipment tires and wheels. TPMS pressures

and warning have been established for the tire

size equipped on your vehicle. Undesirable

system operation or sensor damage may result

when using replacement equipment that is not

of the same size, type, and/or style. Aftermarket

wheels can cause sensor damage. Using

aftermarket tire sealants may cause the Tire

Pressure Monitoring System (TPMS) sensor to

become inoperable. After using an aftermarket

tire sealant it is recommended that you take

your vehicle to an authorized dealer to have your

sensor function checked.

WARNING!

If you continue operating the vehicle when the

Transmission Temperature Warning Light is

illuminated you could cause the fluid to boil over,

come in contact with hot engine or exhaust

components and cause a fire.

CAUTION!

Continuous driving with the Transmission

Temperature Warning Light illuminated will

eventually cause severe transmission damage

or transmission failure.

22_VF_OM_EN_USC_t.book Page 64

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands