manualshive.com logo in svg

RAM Commercial PROMASTER 2022, Owner'S Manual

The RAM Commercial PROMASTER 2022 is a reliable and versatile work vehicle, perfect for businesses of all sizes. To ensure you make the most of its capabilities, we provide a comprehensive Owner's Manual that you can conveniently download for free from our website. Discover the full potential of your PROMASTER 2022 today!

Share
Download
background image

62

GETTING TO KNOW YOUR INSTRUMENT PANEL

 

(kilometers) at speeds greater than 30 mph 

(48 km/h), see an authorized dealer as soon as 

possible to have the problem diagnosed and 

corrected.

The ESC OFF Indicator Light and the ESC Indi

-

cator Light come on momentarily each time the 

ignition is placed in the ON/RUN or MAR (ACC/

ON/RUN) position.

Each time the ignition is turned to ON/RUN or 

MAR (ACC/ON/RUN), the ESC system will be on, 

even if it was turned off previously.

The ESC system will make buzzing or clicking 

sounds when it is active. This is normal; the 

sounds will stop when ESC becomes inactive.

This light will come on when the vehicle is in an 

ESC event.

Electronic Stability Control (ESC) OFF 

Warning Light 

This light indicates the ESC is off.

Each time the ignition is turned to ON/RUN or 

MAR/ON/RUN, the ESC system will be on, even if it 

was turned off previously.

Generic Warning Light

The Generic Warning Light will illuminate 

if any of the following conditions occur: 

Engine Oil Pressure Sensor Failure, 

External Light Failure, Fuel Cut-Off intervention or 

fail, Parking Sensor Failure, Dynamic Steering 

Torque System Failure.
The telltale will remain on fixed in case of swivel 

seat failure and on blinking in case of Air Bag 

Warning Light Failure. Contact an authorized 

dealer immediately for service.

Low Fuel Warning Light 

When the fuel level reaches the low 

threshold, this light will turn on and 

remain on until fuel is added.

Engine Check/Malfunction Indicator (MIL) 

Warning Light  

The Engine Check/Malfunction Indicator 

Light (MIL) is a part of an Onboard 

Diagnostic System called OBD II that 

monitors engine and automatic 

transmission control systems. This warning light 

will illuminate when the ignition is in the ON/RUN 

position before engine start. If the bulb does not 

come on when turning the ignition switch from OFF 

to ON/RUN, have the condition checked promptly.
Certain conditions, such as a loose or missing gas 

cap, poor quality fuel, etc., may illuminate the light 

after engine start. The vehicle should be serviced if 

the light stays on through several typical driving 

styles. In most situations, the vehicle will drive 

normally and will not require towing.

When the engine is running, the MIL may flash to 

alert serious conditions that could lead to 

immediate loss of power or severe catalytic 

converter damage. The vehicle should be serviced 

by an authorized dealer as soon as possible if

this occurs.

WARNING!

A malfunctioning catalytic converter, as 

referenced above, can reach higher 

temperatures than in normal operating 

conditions. This can cause a fire if you drive 

slowly or park over flammable substances such 

as dry plants, wood, cardboard, etc. This could 

result in death or serious injury to the driver, 

occupants or others.

CAUTION!

Prolonged driving with the Malfunction Indicator 

Light (MIL) on could cause damage to the 

vehicle control system. It also could affect fuel 

economy and driveability. If the MIL is flashing, 

severe catalytic converter damage and power 

loss will soon occur. Immediate service is 

required.

22_VF_OM_EN_USC_t.book  Page 62  

Summary of Contents for PROMASTER 2022





























































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2022

Daimler Trucks North America Freightliner Manual preview
Freightliner
Brand: Daimler Trucks North America Pages: 98
Komatsu HM350-2R Brochure preview
HM350-2R
Brand: Komatsu Pages: 6
Komatsu HM300-1 Brochure preview
HM300-1
Brand: Komatsu Pages: 6
CanyCom S100 Operator'S Manual preview
S100
Brand: CanyCom Pages: 66
Dover HEIL DuraPack 5000 Parts And Service Manual preview
HEIL DuraPack 5000
Brand: Dover Pages: 686
DAF LF45 Series Service Manual preview
LF45 Series
Brand: DAF Pages: 254
UD Trucks UD1400 Body Builder'S Book preview
UD1400
Brand: UD Trucks Pages: 385
Volvo FH Driver'S Handbook Manual preview
FH
Brand: Volvo Pages: 966
Mercedes-Benz Actros MP4 2020 Driver Familiarisation preview
Actros MP4 2020
Brand: Mercedes-Benz Pages: 20
Mercedes-Benz Unimog U 20 Manual preview
Unimog U 20
Brand: Mercedes-Benz Pages: 28
Mercedes-Benz Actros 963 Manuallines preview
Actros 963
Brand: Mercedes-Benz Pages: 76
Mercedes-Benz 963 2022 Series Manual preview
963 2022 Series
Brand: Mercedes-Benz Pages: 88
Mercedes-Benz Series 405 Introduction Into Service Manual preview
Series 405
Brand: Mercedes-Benz Pages: 104
Mercedes-Benz Atego Manual preview
Atego
Brand: Mercedes-Benz Pages: 131
Mercedes-Benz Actros 2017 Operating Instructions Manual preview
Actros 2017
Brand: Mercedes-Benz Pages: 436
Mercedes-Benz ACTROS 2002 Operating Instructions Manual preview
ACTROS 2002
Brand: Mercedes-Benz Pages: 620

Brands by name

Popular brands

Load more brands