RAM Commercial PROMASTER 2022 Page 50 Owner'S Manual Download

Page: 50 / 284

GETTING TO KNOW YOUR VEHICLE

IRELESS

HARGING

—

QUIPPED

Wireless Charging Pad

Your vehicle may be equipped with a 15W 3A Qi

wireless charging pad located below the center

stack. This charging pad is designed to wirelessly

charge your Qi enabled mobile phone. Qi is a

standard that allows wireless charging of your

mobile phone.
Your mobile phone must be designed for Qi

wireless charging. If the phone is not equipped

with Qi wireless charging functionality, an

aftermarket sleeve or a specialized back plate can

be purchased from your mobile phone provider or

a local electronics retailer. Please see your

phone’s owner’s manual for further information.

The wireless charging pad is equipped with an

anti-slip mat to hold your mobile phone in place,

and an LED indicator light.
LED Indicator Status:
NOTE:

Using a phone case may interfere with wireless

charging.



No Light: Charging pad is idle or searching for a

device.



Blue Light: Device is detected, and is charging.



Red Light/Flashing: Internal error, or foreign

object is detected.

With a compatible mobile phone placed on the

charging pad, when the ignition is switched to the

OFF position, a phone reminder message will

appear on the instrument cluster to warn the

customer.

WINDOWS

OWER

INDOWS

The control on the left front door panel has

switches that control all power windows. There is a

single opening and closing switch on the front

passenger door for passenger window control.

Power Window Switches

NOTE:

The Key Off Power Delay feature will allow the

power windows to operate for up to three minutes

after the ignition is placed in the OFF position.

This feature is canceled when either front door

is opened.

CAUTION!

The key fob should not be placed on the

charging pad or within 6 inches (15 cm) of it.

Doing so can cause excessive heat buildup and

damage to the fob. Placing the fob in close

proximity of the charging pad blocks the fob from

being detected by the vehicle and prevents the

vehicle from starting.

22_VF_OM_EN_USC_t.book Page 48

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands