RAM Commercial PROMASTER 2022 Owner'S Manual Download Page 47

Page: 47 / 284

GETTING TO KNOW YOUR VEHICLE

USB C

ONTROL

— I

QUIPPED

The USB ports are located on the instrument panel

to the right of the radio. This feature allows an

external USB device to be plugged into the USB

port.
Plugging in a smartphone device to a USB port may

activate Android Auto™ or Apple CarPlay®

features, if equipped. For further information, refer

to “Android Auto™” or “Apple CarPlay®” in the

Owner’s Manual Supplement.
NOTE:

Two devices can be plugged in at the same time,

and both ports will provide charging capabilities.

Only one port can transfer data to the system at a

time.
For example, if a device is plugged into the Type A

USB port and another device is plugged into the

Type C USB port, a message will appear and allow

you to select which device to use.
Different scenarios are listed below when a

non-phone device is plugged into the smaller and

larger USB ports, and when a phone device is

plugged into the smaller and larger USB ports:



“A new device is now connected. Previous

connection was lost”.



“(Phone Name) now connected. Previous

connection was lost”.



“Another device is in use through the same USB

port. Please disconnect the first device to use

the second device”.

Plugging in a phone or another USB device may

cause the connection to a previous device to be

lost.

AUX Jack And USB Ports

By using a USB cable to connect an external

device:



The device can be played on the vehicle’s sound

system, providing the artist, track title, and

album information on the radio display.

NOTE:

Depending on track configuration, track infor

mation may not be present on the radio display.



The device can be controlled using the radio

buttons to play, and browse the contents of the

device.



The audio device battery charges when plugged

into the USB port.

NOTE:

Charge unsupported devices with the Charge Only

USB ports. If an unsupported device is plugged into

a Media USB port, a message will display on the

touchscreen that the device is not supported by

the system.

USB Charging Port

The USB connector port can be used for charging

purposes only. Use the connection cable to

connect an external USB device to the vehicle's

USB charging port.
NOTE:

If the device battery to be charged is completely

depleted, it may take awhile to charge.

1 — Media USB C and A Ports
2 — Charge Only USB C and A Ports

WARNING!

Do not plug in or remove the external device

while driving. Failure to follow this warning could

result in a collision.

22_VF_OM_EN_USC_t.book Page 45

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands