RAM Commercial PROMASTER 2022 Owner'S Manual Download Page 31

Page: 31 / 284

GETTING TO KNOW YOUR VEHICLE

(Continued)

NOTE:

Do not reposition the head restraint 180 degrees

to the incorrect position in an attempt to gain addi

tional clearance to the back of the head.

Front Head Restraint Removal

To remove the head restraint, raise it up as far as

it can go. Then, push the adjustment button and

the release button at the base of each post while

pulling the head restraint up. To reinstall the head

restraint, push the adjustment button and the

release button at the base of each post and put the

head restraint posts into the holes. Then, adjust it

to the appropriate height.
NOTE:

Do not reposition the head restraint 180 degrees

to the incorrect position in an attempt to gain

additional clearance to the back of the head.

UCONNECT VOICE RECOGNITION —

IF EQUIPPED

NTRODUCING

OICE

ECOGNITION

Start using Uconnect Voice Recognition with these

helpful quick tips. It provides the key Voice

Commands and tips you need to know to control

your vehicle’s Voice Recognition (VR) system.
NOTE:

Voice Recognition is only available on the

Uconnect 5 NAV With 10.1-inch Display.

ASIC

OICE

OMMANDS

The following can be given at any point while using

your Uconnect system.
Push the VR button and after the beep, say a

command. You can also say the system “Wake Up”

word, “Hey Uconnect” or “Hey Ram”, and then say

a command. The factory default Wake Up word is

set to “Hey Uconnect” and can be reprogrammed

through the Uconnect Settings. After the beep, say:



“Cancel” to stop a current voice session.



“Help” to hear a list of suggested Voice

Commands.



“Repeat” to listen to the system prompts again.

Notice the visual cues that inform you of your Voice

Recognition system’s status.

WARNING!



A loose head restraint thrown forward in a

collision or hard stop could cause serious

injury or death to occupants of the vehicle.

Always securely stow removed head restraints

in a location outside the occupant compart

ment.



ALL the head restraints MUST be reinstalled in

the vehicle to properly protect the occupants.

Follow the preceding reinstallation instruc

tions prior to operating the vehicle or occu

pying a seat.

WARNING!

22_VF_OM_EN_USC_t.book Page 29

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands