RAM Commercial PROMASTER 2022 Page 267 Owner'S Manual Download | Manualshive

Page: 267 / 284

background image

TECHNICAL SPECIFICATIONS

265

ENGINE FLUIDS AND LUBRICANTS

Component

Fluid, Lubricant, or Genuine Part

Engine Coolant

We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic

Additive Technology) meeting the requirements of the manufacturer Material Standard MS.90032.

Engine Oil

We recommend using Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the requirements of the

manufacturer Material Standard MS-6395. Equivalent full synthetic SAE 0W-20 engine oil can be used but must have

the API Starburst trademark

Engine Oil Filter

We recommend using a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter is unavailable, only use filters that

meet or exceed SAE/USCAR-36 Filter Performance Requirements.

Fuel Selection

87 Octane (R+M)/2 Method, 0-15% Ethanol.

CAUTION!



Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and

may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Tech

-

nology (HOAT) engine coolant (antifreeze) or any “globally compatible” coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into the

cooling system in an emergency, the cooling system will need to be drained, flushed, and refilled with fresh OAT coolant (conforming to MS.90032), by an

authorized dealer as soon as possible.



Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be

compatible with the radiator engine coolant and may plug the radiator.



This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze)

is not recommended.

9

22_VF_OM_EN_USC_t.book Page 265

«
...
265
266
267
268
269
...
»

Summary of Contents for PROMASTER 2022





























































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2022

Brand: U-Line Pages: 6

Brand: VERDEGRO Pages: 68

Peterbilt 567 2021

Brand: Paccar Pages: 332

Brand: Haklift Pages: 53

Brand: Magliner Pages: 7

Truckster XD 2018

Brand: Cushman Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands