RAM Commercial PROMASTER 2022 Page 240 Owner'S Manual Download

Page: 240 / 284

238

SERVICING AND MAINTENANCE

2. Using a suitable tool, flex the housing to lift the

light pod cover away from the unit.

Dome Lamp Light Pod Cover

3. Remove and replace the bulbs as needed.

Dome Lamp Light Bulbs

4. Close the housing cover making sure it snaps

together properly and connect the lamp.

5. Install overhead console into place making

sure to seat the assembly’s forward end first

and then snapping it flush so that the tension

spring is fully seating in the housing.

TIRES

IRE

AFETY

NFORMATION

Tire safety information will cover aspects of the

following information: Tire Markings, Tire

Identification Numbers, Tire Terminology and

Definitions, Tire Pressures, and Tire Loading.

22_VF_OM_EN_USC_t.book Page 238

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands