RAM Commercial PROMASTER 2022 Page 210 Owner'S Manual Download

Page: 210 / 284

208

IN CASE OF EMERGENCY

If the key fob is unavailable or the vehicle's battery

is discharged, for instructions on shifting the

automatic transmission out of PARK (P) for towing

page 205.

UTOMATIC

RANSMISSION

The FCA US LLC recommends towing your vehicle

with all four wheels OFF the ground using a flatbed.
If flatbed equipment is not available, and the

transmission is operable, this vehicle may be

towed (with front wheels on the ground) under the

following conditions:



The transmission must be in NEUTRAL (N).



The towing speed must not exceed

25 mph (40 km/h).



The towing distance must not exceed

15 miles (24 km).

If the transmission is not operable, or the vehicle

must be towed faster than 25 mph (40 km/h) or

farther than 15 miles (24 km), tow with the front

wheels OFF the ground (using a flatbed truck, or

wheel lift equipment with the front wheels raised).

ENHANCED ACCIDENT RESPONSE SYSTEM

(EARS)

This vehicle is equipped with an Enhanced

Accident Response System.
This feature is a communication network that

takes effect in the event of an impact

page 175.

EVENT DATA RECORDER (EDR)

This vehicle is equipped with an event data

recorder (EDR). The main purpose of an EDR is to

record data that will assist in understanding how a

vehicle’s systems performed under certain crash

or near crash-like situations, such as an air bag

deployment or hitting a road obstacle

page 176.

CAUTION!



Do not use sling type equipment when towing.

Vehicle damage may occur.



When securing the vehicle to a flat bed truck,

do not attach to front or rear suspension

components. Damage to your vehicle may

result from improper towing.

CAUTION!



Towing faster than 25 mph (40 km/h) or

farther than 15 miles (24 km) with front

wheels on the ground can cause severe trans

mission damage. Damage from improper

towing is not covered under the New Vehicle

Limited Warranty.



Towing this vehicle in violation of the appoved

requirements can cause severe transmission

damage. Damage from improper towing is not

covered under the New Vehicle Limited

Warranty.

22_VF_OM_EN_USC_t.book Page 208

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands