RAM Commercial PROMASTER 2022 Page 10 Owner'S Manual Download | Manualshive

Page: 10 / 284

background image

8

SYMBOLS KEY

If you do not read this entire Owner’s Manual, you may miss important

information. Observe all Cautions and Warnings.

VAN CONVERSIONS/CAMPERS

The New Vehicle Limited Warranty does not apply to body modifications or

special equipment installed by van conversion/camper manufacturers/body

builders. US residents refer to the Warranty Information, Section 2.1.C.

Canadian residents refer to the “What Is Not Covered” section of the Warranty

Information. Such equipment includes video monitors, DVD/Blu-Ray™,

heaters, stoves, refrigerators, etc. For warranty coverage and service on these

items, contact the applicable manufacturer.
Operating instructions for the special equipment installed by the conversion/

camper manufacturer should also be supplied with your vehicle. For any

additional instructions, please contact your conversion/camper manufacturer.
To obtain dimensional and technical specifications for your vehicle, refer to the

Body Builder’s Guide at

https://www.ramtrucks.com/ram-commercial/

body-builders-guide.html.

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!

These statements are against operating

procedures that could result in a collision, bodily

injury and/or death.

CAUTION!

These statements are against procedures that

could result in damage to your vehicle.

NOTE:

A suggestion which will improve installation,

operation, and reliability. If not followed, may result

in damage.

TIP:

General ideas/solutions/suggestions on easier

use of the product or functionality.

PAGE REFERENCE

ARROW

Follow this reference for additional information on

a particular feature.

FOOTNOTE

Supplementary and relevant information

pertaining to the topic.

WARNING!

Any modifications or alterations to this vehicle could seriously affect its

roadworthiness and safety and may lead to a collision resulting in serious

injury or death.

22_VF_OM_EN_USC_t.book Page 8

«
...
8
9
10
11
12
...
»

Summary of Contents for PROMASTER 2022





























































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2022

Brand: GMC Pages: 264

PROMASTER Cargo Van 2019

Brand: RAM Commercial Pages: 164

Brand: Magliner Pages: 10

Brand: SEA Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands