manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

76

SAFETY

 

The steering wheel hub trim cover and the 

upper passenger side of the instrument panel 

separate and fold out of the way as the air bags 

inflate to their full size. The front air bags fully 

inflate in less time than it takes to blink your 

eyes. The front air bags then quickly deflate 

while helping to restrain the driver and front 

passenger.

Supplemental Side Air Bags 

Supplemental Seat-Mounted Side Air Bags 

(SABs)
This vehicle is equipped with Supplemental 

Seat-Mounted Side Air Bags (SABs).
Supplemental Seat-Mounted Side Air Bags 

(SABs) are located in the outboard side of the 

front seats. The SABs are marked with “SRS 

AIRBAG” or “AIRBAG” on a label or on the seat 

trim on the outboard side of the seats.
The SABs may help to reduce the risk of 

occupant injury during certain side impacts, in 

addition to the injury reduction potential 

provided by the seat belts and body structure.

Front Supplemental Seat-Mounted Side Air Bag Label

When the SAB deploys, it opens the seam on 

the outboard side of the seatback’s trim cover. 

The inflating SAB deploys through the seat 

seam into the space between the occupant and 

the door. The SAB moves at a very high speed 

and with such a high force that it could injure 

occupants if they are not seated properly, or if 

items are positioned in the area where the SAB 

inflates. Children are at an even greater risk of 

injury from a deploying air bag.

Supplemental Side Air Bag Inflatable Curtains 

(SABICs)
This vehicle is equipped with Supplemental 

Side Air Bag Inflatable Curtains (SABICs).
Supplemental Side Air Bag Inflatable Curtains 

(SABICs) are located above the side windows. 

The trim covering the SABICs is labeled “SRS 

AIRBAG” or “AIRBAG.”

Supplemental Side Air Bag Inflatable Curtain (SABIC) 

Label Location

SABICs may help reduce the risk of head and 

other injuries to front and rear seat outboard 

occupants in certain side impacts, in addition to 

the injury reduction potential provided by the 

seat belts and body structure.

WARNING!

Do not use accessory seat covers or place 

objects between you and the Side Air Bags; 

the performance could be adversely affected 

and/or objects could be pushed into you, 

causing serious injury.

20_VF_OM_EN_USC_t.book  Page 76  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Yakima SideWinder Installation Instructions And Owner'S Manual preview
SideWinder
Brand: Yakima Pages: 8
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Brand: GReddy Pages: 9
Whispbar K448W Fitting Instructions Manual preview
K448W
Brand: Whispbar Pages: 15
Connects2 adaptiv mini ADVM-BM1 Fitting & User Manual preview
adaptiv mini ADVM-BM1
Brand: Connects2 Pages: 4

Brands by name

Popular brands

Load more brands