RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 39

Page: 39 / 260

GETTING TO KNOW YOUR VEHICLE

open the front and rear windows together to

minimize the buffeting. If the buffeting occurs

with the sunroof open, adjust the sunroof

opening to minimize the buffeting or open any

window.

HOOD

Opening

To open the hood, two latches must be

released.

1. Open the driver’s door to gain access to the

hood release lever. Pull the hood release

lever located on the side of the instrument

panel.

Hood Release

2. Move to the outside of the vehicle, reach

into the opening beneath the center of the

hood and push the safety latch lever to the

right to release it, before raising the hood.

Hood Safety Latch Lever Location

3. Raise the hood and place the hood prop rod

in hood slot to secure the hood in the open

position.

Hood Prop Rod Slot

Closing

WARNING!

Be sure the hood is fully latched before

driving your vehicle. If the hood is not fully

latched, it could open when the vehicle is in

motion and block your vision. Failure to follow

this warning could result in serious injury or

death.

20_VF_OM_EN_USC_t.book Page 37

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands