RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 237

Page: 237 / 260

MULTIMEDIA

235

STEERING WHEEL AUDIO CONTROLS

The remote sound system controls are located

on the surface of the steering wheel.

Remote Sound System Controls

Pushing the top of the left-hand switch will

increase the volume, and pushing the bottom of

the switch will decrease the volume.
Pushing the Voice Recognition (VR) button

below the volume controls will begin your voice

command functions. Please refer to “Uconnect

Voice Recognition” section for further

information.
The function of the right-hand control is

different depending on which mode you are in.
The following describes the right-hand control

operation in each mode.

Radio Operation

Pushing the top of the right-hand switch will

“Scan” up for the next listenable station, and

pushing the bottom of the right-hand switch will

“Scan” down for the next listenable station.
Pushing the Phone pick up button on top of the

of the Scan buttons will open a phone call.

Pushing the Phone hang up button below the

Scan buttons will close a phone call.

Player Operation

Pushing the switch up once will go to the next

track on the Player. Pushing the switch down

once will go to the beginning of the current track

or to the beginning of the previous track if it is

within one second after the current track begins

to play.
If you push the switch up or down twice, it plays

the second track; three times, it will play the

third, etc.

IPOD®/USB/MP3 CONTROL — IF EQUIPPED

The USB Port and Auxiliary Jack is located on

the instrument panel left of the radio (driver’s

lower right). This feature allows an iPod® or

external USB device to be plugged into the USB

port.

USB Port And AUX Jack

iPod® control supports Mini, 4G, Photo, iPod

nano®, 5G iPod® and iPhone® devices. Some

iPod® software versions may not fully support

the iPod® control features. Please visit

Apple’s® website for software updates.

20_VF_OM_EN_USC_t.book Page 235

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands