manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

116

STARTING AND OPERATING

 

(Continued)

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) 

Towing This Vehicle Behind Another Vehicle  

Recreational Towing

Recreational towing is allowed ONLY if the front 

wheels are OFF the ground. This may be 

accomplished using a tow dolly or vehicle 

trailer. If using a tow dolly, follow this procedure:

1. Properly secure the dolly to the tow vehicle, 

following the dolly manufacturer's 

instructions.

2. Drive the front wheels onto the tow dolly.

3. Firmly apply the parking brake. Place the 

transmission in PARK.

4. Properly secure the front wheels to the 

dolly, following the dolly manufacturer's 

instructions.

5. Release the parking brake.

Towing Condition

Wheels OFF the Ground

Automatic Transmission

Flat Tow

NONE

NOT ALLOWED

Dolly Tow

Front

OK

Rear

NOT ALLOWED

On Trailer

ALL

OK

NOTE:

When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details.

CAUTION!

DO NOT flat tow this vehicle. Damage to the 

drivetrain will result. If this vehicle requires 

towing, make sure the drive wheels are OFF 

the ground.

Towing this vehicle in violation of the above 

requirements can cause severe transmis

-

sion damage. Damage from improper 

towing is not covered under the New 

Vehicle Limited Warranty.

CAUTION!

 (Continued)

20_VF_OM_EN_USC_t.book  Page 116  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
Cadillac 2004 ESCALADE Customer Convenience/Personalization Manual preview
2004 ESCALADE
Brand: Cadillac Pages: 20
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Lantronix FOX3 Series Hardware Manual preview
FOX3 Series
Brand: Lantronix Pages: 51
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Honda 2007 Fit User Information preview
2007 Fit
Brand: Honda Pages: 24
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Brand: Ford Pages: 51
ECS Electronics CT-050-B1 Fitting Instructions Manual preview
CT-050-B1
Brand: ECS Electronics Pages: 42
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2
Rosco STSK4730 Installation & User Manual preview
STSK4730
Brand: Rosco Pages: 12

Brands by name

Popular brands

Load more brands