RAM Commercial PROMASTER 2017, Owner'S Manual

Page: 130 / 354

•
Disconnecting/Reconnecting the battery resets the sys-
tem.
NOTE: If the reset operation occurs in the presence of the
screens concerning Trip A or Trip B, only the information
associated with Trip A or Trip B functions will be reset.
Start Of Trip Procedure
With the ignition on, push and hold the TRIP button for
over two seconds to reset trip information.
Exit Trip
To exit the Trip function, wait until all the values have been
displayed or hold the
MENU button for longer than one
second.
Briefly push and release the
MENU
button to go back to
the menu screen or push and hold the
MENU
(approxi-
mately one second) to go back to the main screen without
storing settings.
Trip Functions
Both trip functions are resettable (reset — start of new trip).
“Trip A” can be used to display the figures relating to:
•
Trip Distance A
•
Average Fuel Consumption
•
Average Speed A
•
Travel Time A (Driving Time)
“Trip B” can be used to display the figures relating to:
•
Trip Distance B
•
Average Fuel Consumption
•
Average Speed B
•
Travel Time B (Driving Time)
“Current Trip” can be used to display the figures relating
to:
NOTE: “Trip B” functions may be excluded (see “Trip B
Data”). “Range” and “Instantaneous Fuel Consumption”
cannot be reset.
Values Displayed
Range
This indicates the distance which may be traveled with the
fuel remaining in the tank, assuming that driving condi-
tions will not change. The message “----” will appear on the
display in the following cases:
•
Distance less than 30 miles (or 50 km).
128 UNDERSTANDING YOUR INSTRUMENT PANEL