RAM Commercial CHASSIS CAB 2020 Owner'S Manual Download

Page: 78 / 516

GETTING TO KNOW YOUR VEHICLE

Storage Bin (Regular Cab)

The storage bin is located behind the front

seats and runs the length of the cab.

Storage Bin

Fold Flat Load Floor — If Equipped

Crew Cab models with a 60/40 rear seat may

be equipped with a folding load floor.

Unfolding The Load Floor/Crew Cab

1. Lift the 60/40 seat cushion(s) to the

upward position.

Load Floor Legs In Stowed Position

2. Unfold both the legs using the straps.

Load Floor Legs In Opened Position

3. Lift the front panel until the load floor

unfolds into position.

Load Floor In Open Position

4. Reverse the procedure to store the load

floor.

Positioning The Load Floor For Storage Access

Under The Seat

1. Lift the 60/40 seat cushion(s) to the

upward position.

2. Unsnap the securing snap located at either

side of the load floor.

3. Lift the load floor up to access storage

under the load floor.

WARNING!

Do not operate the vehicle with loose items

stored on the load floor. While driving or in an

accident you may experience abrupt stopping,

rapid acceleration, or sharp turns. Loose

objects stored on the load floor may move

around with force and strike occupants,

resulting in serious or fatal injury.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 76

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands