RAM Commercial CHASSIS CAB 2020 Page 330 Owner'S Manual Download

Page: 330 / 516

328

IN CASE OF EMERGENCY

Emergency Tow Hooks — If Equipped

Your vehicle may be equipped with emergency

tow hooks.

Emergency Tow Hooks

NOTE:

For off-road recovery, it is recommended to use

both of the front tow hooks to minimize the risk

of damage to the vehicle.

ENHANCED ACCIDENT RESPONSE SYSTEM

(EARS)

This vehicle is equipped with an Enhanced Acci

dent Response System.
Please refer to “Occupant Restraint Systems” in

“Safety” for further information on the

Enhanced Accident Response System (EARS)

function.

EVENT DATA RECORDER (EDR)

This vehicle is equipped with an Event Data

Recorder (EDR). The main purpose of an EDR is

to record data that will assist in understanding

how a vehicle’s systems performed under

certain crash or near crash-like situations, such

as an air bag deployment or hitting a road

obstacle.
Please refer to “Occupant Restraint Systems” in

“Safety” for further information on the Event

Data Recorder (EDR).

WARNING!



Do not use a chain for freeing a stuck

vehicle. Chains may break, causing serious

injury or death.



Stand clear of vehicles when pulling with

tow hooks. Tow straps may become disen

gaged, causing serious injury.

CAUTION!

Tow hooks are for emergency use only, to

rescue a vehicle stranded off road. Do not

use tow hooks for tow truck hookup or

highway towing. You could damage your

vehicle.

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 328

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands