RAM Commercial CHASSIS CAB 2020 Owner'S Manual Download

Page: 259 / 516

STARTING AND OPERATING

257

LaneSense Warning Message

The LaneSense system will indicate the current

lane drift condition through the instrument

cluster display.
When the LaneSense system is on, the lane

lines are gray when both of the lane boundaries

have not been detected and the LaneSense tell

tale is solid white.

System ON (Gray Lines) With White Telltale

Left Lane Departure — Only Left Lane Detected



When the LaneSense system is on, the Lane

Sense Telltale is solid white when only the

left lane marking has been detected and the

system is ready to provide visual warnings in

the instrument cluster display if an uninten

tional lane departure occurs on the left side.



When the LaneSense system senses the lane

has been approached and is in a lane depar

ture situation, the visual warning in the

instrument cluster display will show the left

lane line flashing yellow (on/off). The Lane

Sense telltale changes from solid white to

flashing yellow.

Lane Crossed (Flashing Yellow Lane Line) With Yellow

Telltale

NOTE:

The LaneSense system operates with similar

behavior for a right lane departure when only

the right lane marking has been detected.

Left Lane Departure — Both Lane Lines

Detected



When the LaneSense system is on, and both

the lane markings have been detected, the

system is "armed" to provide visual warnings

in the instrument cluster display and a torque

warning in the steering wheel if an uninten

tional lane departure occurs. The lane lines

turn from gray to white and the LaneSense
telltale is solid green.

Lanes Sensed (White Lines) With Green Telltale

2020_RAM_CHASSIS_CAB_OM_USA=GUID-6C67832B-7839-4CCF-BEFC-CDF988F949EA=1=en=.book Page 257

Summary of Contents for CHASSIS CAB 2020





































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 2020, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2020

Reviews:

Related manuals for CHASSIS CAB 2020

Brands by name

Popular brands