Raleigh Pedelec Groove 2.0, User Manual, Page: 210 / 321

18 Original User Manual | Groove 2.0
7 Charger
If used incorrectly, the charger may be damaged or
cause injury.
•
Only use the charger in dry rooms.
•
Only place the charger in a secure, stable posi-
tion on a suitable surface.
•
Do not cover the charger or place any objects on
it, as otherwise it could overheat and catch fire.
Do not use any other charger. Only charge the bat-
tery using the charger provided, or a charger ap-
proved by us for the purpose.
Read the type plates on the charger before using it
for the first time.
You can charge your Pedelec Groove 2.0 directly via a
charging socket in the battery. The battery can remain in
the Pedelec during the charging process.
Charging the battery
Alternatively, you can take the battery out of its holder
and charge it elsewhere
➠
Chapter 6 “Battery” . This is
recommended if it is cold outside, in order to charge the
battery in a warmer room. The battery can be charged at
temperatures between 0°C and +45°C.
8 Display and control unit
1 2 3 4
5
6
7 8 9 10
11
12
13
Display
NO SYMBOL FUNCTION
1 VEL Display of current speed
2 ODO Display of the total kilometres
3 DST Display of the trip distance
4 Battery charge state indicator
5 Display values (speed, total kilome-
tres, trip distance or error code)
6 Display of the unit (in km/h)
7 Ride in Power mode
8 Ride in Sport mode
9 Ride in Economic mode
10 Activate/deactivate pushing assis-
tance
Control unit
Switch the Pedelec on if you want to use the front
and rear lights. The front and rear lights are pow-
ered by the battery.
The front and rear lights can remain lit for about
another two hours after the motor has been
switched off.