15
2021 RALE® ST120 INSTALLATION GUIDE
B
r a k e
i
n S Ta l l aT i o n
Check tension
5. Torque the four nuts under the yoke to 30 FT/LB.
1.5”
Adjust tension /
alignment
1. Raise the bike until the track kit is fully suspended.
2. The adjustment screws at the rear bogie wheels adjust the track
alignment and tension.
3. Tighten the track until there is 3/4” to 1” of slack between the track
and the hyfax.
4. Using the nuts on the adjustment screws lock adjustment into
position.
5. Torque the track kit rear axle bolts to 50 FT/LB
S
e T T i n g
T
r a c k
T
e n S i o n
Torque (4) nuts
