MTR 221 ACS - MTR 221 ACS DHHS
MANUALE ISTRUZIONI / INSTRUCTION MANUAL
O
PTIONAL
I
TEMS
185
Model R 221 ACS - R 221 ACS DHHS
MT
R
2
21
ACS
-
MTR
2
21
AC
S DHH
S - Optio
nal Ite
m
s
Verification of Correct Installation
1. The 4 tabs should overlap the flange outer ring, see
Fig. Correct Overlap
.
2. Ensure the mounting flange is flat against the collimator mounting plane, see
Fig. Correct
Overlap
.
3. Ensure the 4 tabs are not in contact with only the mounting flange edge, see
Fig. Incorrect
Overlap
.
4. Once the collimator is mounted, if not already, return the collimator/tube head to the
intended use position. Rotate and/or gently pull the collimator to ensure correct coupling.
5. If the collimator is loose, something is incorrect. Repeat above mounting instructions, and if
issues persist, please contact Ralco.
W
ARNING
I
T
IS
THE
DUTY
OF
THE
INSTALLER
TO
ENSURE
NO
RISK
OF
THE
COLLIMATOR
FALLING
EXISTS
. E
NSURE
THE
FOLLOWING
,
AS
IN
EACH
SCENARIO
BELOW
SERIOUS
RISK
OF
INJURY
AND
/
OR
PROPERTY
DAMAGE
MAY
EXIST
DUE
TO
NON
-
ADHERENCE
.
RO 493 Dual Energy Additional Variable Filtration
This accessory allows extremely fast filter switching (200 ms) per 90° movement and minimal
vibration (filters not included- only available with RO 494).
Fig. Correct Overlap
Fig. Incorrect Overlap
