v2.0.0.0.0
21
5. How to connect with LoRaServer?
The LoRaServer is an open source project which you can find in
.
You can use RAK7200 to connect with LoRaServer according to the following steps:
In this document, i assume that you are using RAK LoRa gateway and its built-in
LoRaServer, or you are using RAK cloud testing LoRaServer. But if you are using a
LoRaServer which is built by yourself, maybe you need to configure it by yourself too.
OK! Let’s get start!
Open the web page of the LoRaServer which you want to connect with and login.
By default, there is already one or more items in this page, you can use it or create a
new item. Now, let’s create a new item by click the “CREATE” button, and fill in them.
Summary of Contents for RAK7200
